80-Series® pumps are designed for non-stop workloads. The straight-in-suction design of these high-efficiency pumps guarantees quick, positive self-priming and allows them to operate at higher suction levels than most other self-priming centrifugal pumps.
Liquid enters directly into the impeller eye. A suction check valve prevents in-line return flow when the pump is shut off. And, because 80- Series pumps have few moving parts, maintenance is minimal. Gorman Ruup 80-Series pumps are available with self-lubricated mechanical shaft seals.
SEWAGE AND SEWAGE TREATMENT
SEWAGE AND SEWAGE TREATMENT
SEWAGE AND SEWAGE TREATMENT
FOOD
FOOD
FOOD
FOOD
INDUSTRIAL WASTEWATER
FOOD
FOOD
FUEL TRANSFER
CONSTRUCTION
Straight-In Suction Design
Exclusive 80-Series pump design provides higher suction lift, increased efficiency and allows pumps to operate at higher suction lifts than most other self-priming centrifugal pumps.
Multiple Seal Options
80-Series pumps are available with single and double seal options, grease, oil, and self-lubricated designs, depending on pump application. Carbon/ni-resist, carbon/ceramic, sintered bronze/steel, silicon carbide, and tungsten carbide seal faces. Fluorocarbon, Buna, and PTFE elastomers.
High Efficiency Impeller
Multi-vane open impeller is designed for high efficient. Impeller will handle up to 2 3/8" (60 mm) solids, depending on pump model.
Replaceable Wearplate
Replaceable wearplate provides maximum operating efficiency at all times. No expensive castings to replace. Extra-thick construction for life.
Drive Variations
80-Series pumps are available as basic units for connection to customers' power source or may be flex coupled, close coupled, or V-belt driven by an electric motor. Pumps can also be powered by gasoline or diesel engines.
Sizes
1-1/4″, 1-1/2″, 2″, 3″, 4″, 5″, 6″, 8″, 10″
Max Capacity
177 l/sec
Max Head
62m
Max Solids
2.5″
Materials
Cast Iron, Stainless Steel
Self-priming centrifugal pump
Call Hydromarque on +44(0)1733 370545 or click the link below and contact one of the team for a data sheet on the Gorman Rupp AMT diaphragm pump.
Self-priming centrifugal pump
Call Hydromarque on +44(0)1733 370545 or click the link below and contact one of the team for a parts list on the Gorman Rupp 80-Series pumps.
Self-priming centrifugal pump
Call Hydromarque on +44(0)1733 370545 or click the link below and contact one of the team for a O&M Manual on the Gorman Rupp 80-Series pumps.
Call Hydromarque on +44(0)1733 370545 or click the link below and contact one of the sales team for a quote or any for any further assistance on your pump requirements.
Get in touch
Get in touch with one of our technical experts today who would be happy to assist you.
© 2024 - Hydromarque. All rights reserved.